Accessories for collectors (combs)
We offer to buy accessories for collectors (combs) for the heating system "Warm floor". This category is currently under construction, so please contact our managers for any questions.
We suggest familiarize yourself with the procedure for placing an online order on our website - by clicking on the specified link, you can get a detailed description of the actions and watch a short VIDEO with explanations.
The valve with a 1/2" thread with a flow meter of 0.5-5 l/min is used in heating systems for visualization and manual adjustment of the coolant flow in each of the heating circuits.
The valve with a 1/2" thread with a flow meter of 0.5-5 l/min is used in heating systems for visualization and manual adjustment of the coolant flow in each of the heating circuits.
Brass ball valve 25mm VN "butterfly" red with a thermometer and an American is used to open / shut off the flow and to control the incoming / outgoing temperature of the coolant in underfloor heating systems.
Brass ball valve 25mm VN "butterfly" blue with a thermometer and an American is used to open / shut off the flow and to control the incoming / outgoing temperature of the coolant in underfloor heating systems.
Brass ball valves 25mm VN "butterfly" red and blue with a thermometer and an American are used to open / shut off the flow and to control the incoming / outgoing temperature of the coolant in underfloor heating systems.
Ball valve nickel-plated 25mm VN "butterfly" red with a thermometer and an American is used to open / shut off the flow and to control the incoming / outgoing temperature of the coolant in underfloor heating systems.
Ball valve nickel-plated 25mm VN "butterfly" blue with a thermometer and an American is used to open / shut off the flow and to control the incoming / outgoing temperature of the coolant in underfloor heating systems.
Ball valves nickel-plated 25mm VN "butterfly" red / blue with a thermometer and an American are used to open / shut off the flow and to control the incoming / outgoing temperature of the coolant in underfloor heating systems.
Angle thermostatic brass valve is designed to regulate the flow of coolant through heating devices by changing the variable section of the valve.
Nickel-plated angular thermostatic valve is designed to regulate the flow of coolant through heating devices by changing the variable section of the valve.
Direct thermostatic brass cock is designed to regulate the thermal regime of the heater by changing the flow rate of the coolant.
Direct thermostatic nickel-plated cock is designed to regulate the thermal regime of the heater by changing the flow rate of the coolant.
The direct thermostatic brass valve is designed for manual or automatic control of the heat carrier flow through the heater.
A straight brass balancing valve is designed to adjust (balance) the calculated flow rate of the coolant through the heaters of water heating systems, as well as to shut off the line when the heater is turned off.
A drain group with a drain cock and an air vent is used in collector heating systems for automatic air removal and manual draining of the coolant from heating circuits.
Brass drainage ball valve is designed to drain the coolant in underfloor heating systems.
The universal metal manifold fastening kit is used to fix the beams (combs) of the underfloor heating system collector in a certain position on the wall with the possibility of connecting inlet and outlet lines.
Thermostatic head with remote sensor and M30x1.5mm thread for automatic adjustment of the coolant flow in collector heating systems.
The thermostatic valve (valve) G 1/2" with M30x1.5mm thread is used in heating systems for manual / automatic adjustment or blocking of the coolant flow in each of the heating circuits.
Brass fitting "evrokunus" nickel-plated - with a ferrule and a union nut for connecting a 16x2mm metal-plastic or XLPE pipe to a manifold with outlets with a diameter of 3/4"
Brass fitting "evrokunus" - with a ferrule and a union nut for connecting a 16x2mm metal-plastic or XLPE pipe to a manifold with outlets with a diameter of 3/4"
Pointer thermometer 0-120 degrees with a 9mm submersible sensor and the ability to manually adjust the temperature range.
Connector Standart for manifold with thread 1" left is designed to connect the circulation pump to the manifold group.
The connector Standart for a manifold with a 1" thread, nickel-plated, is designed to connect a circulation pump to a manifold group.
Premium manifold connector with 1" left thread is designed to connect a circulation pump to a manifold group.
Premium manifold connector with 1" thread, right, is designed to connect a circulation pump to a manifold group.
Premium connector for manifold with 1" left nickel-plated thread is designed to connect a circulation pump to a manifold group.
Premium connector for a manifold with a 1" thread, nickel-plated, right, is designed to connect a circulation pump to a manifold group.