Sell industrial CNC lathes
The CNC metal lathe is designed for both single and batch production of metal parts using a contour numerical control system that allows real-time control of the processing process and manufacture parts of various configurations.
The positioning of the angle of rotation of the main cartridge is carried out by installing a special encoder (position sensor) on the machine spindle. The main drive of the machine is carried out by means of the main engine, which has a high efficiency and 3-phase power supply 380V. The movement of the tool, necessary for the implementation of the cutting process along the three coordinate axes X, Y, Z, allows sequential processing of several surfaces of the part in one installation, which significantly speeds up the manufacturing process and increases the accuracy of processing. To facilitate the control of tool movement along the coordinate axes, the CNC metal lathe is equipped with electronic flywheels. High machining accuracy is achieved by installed ball screws, which, compared to conventional screws, have a higher efficiency and torque transmission with minimal clearances.
Positioning along the axes is carried out from a separate electric motor, which allows you to greatly increase productivity.
Cooling of the cutting edges of the tool during the cutting process is carried out by a modern coolant supply system, which increases productivity, accuracy and quality of processing.
Coolant is supplied by a pump. The automatic tool holder is controlled by a servo motor, which has a smooth speed control range with a change in the direction of rotation of 30-4000 rpm. Simplicity of programming allows debugging the machine directly at the workplace.
In the CNC system of the machine during its operation, the parameters of the control program are adjusted and changed in response to data from various sensors of the system. It is possible to enter and correct the parameters of the control program manually. Various types of equipment and tools can be added to the standard set of CNC lathe equipment (optional).
I will sell a hydraulic briquetting press for the manufacture of cylindrical briquettes weighing 3-6 kg by cold pressing from scrap metal. The press is located in Kharkov
I will sell a used milling machine MAHO MH 800P (made in Germany) in working condition with accessories (equipment, slotting head). The machine is connected and located in Chuguev
I will sell an automatic lathe with CNC LC-30 with automatic bar feed - designed for processing a bar (pipe) made of steel, brass, copper, aluminum (located in Kharkiv)
I will sell a new CNC lathe CK0632 (China), designed for mass production of metal parts. Professional series machine - equipped with a WA901XT stand, in its original packaging - located in Kharkov
I will sell a new CNC lathe CK0640 (China), designed for mass production of metal parts. The machine of a professional series - is completed with a stand WA901XT, in an original packing - delivery under the order.
I will sell a new CNC lathe CK6140 (China), designed for mass production of metal parts. The machine of a professional series - is completed with a rack WA901XT, in an original packing - is delivered under the order.
I will sell a new CNC lathe CK6150 (China), designed for mass production of metal parts. The machine of a professional series - is completed with a stand WA901XT, in an original packing - delivery under the order.