Flat flanges, collar and flange plugs

Steel flanges are part of the connection of pipelines, which are widely used in many industries and utilities, and include collar flanges, flat flanges and flanged plugs (blind flanges). The manufacture of flanges can be carried out both by turning blanks from steel sheet (turned flanges and flange plugs), and by turning casting blanks on lathes (turned and collar flanges). Our company manufactures and sells flat steel flanges, the dimensions of which are in the range from 15mm to 500mm, designed for a nominal pressure of 1.0-1.6 MPa. Manufacturers of the proposed collar flanges 50.80 and 100 mm guarantee a nominal pressure of up to 6.3 MPa, subject to the technology of docking with the pipeline. The flanges are fastened together with bolts (or threaded rods) and nuts of the appropriate diameter, and gaskets for flanges made of biconite are used as seals, which are resistant when working in the environment of water, gas, gasoline, kerosene, diesel fuel, mineral oils and their mixtures .You can buy biconite flanges and gaskets at any representative office of our company in Ukraine, where other types of valves are also sold. When ordering flanges and gaskets, specify the dimensions of the pipeline that will be connected with them, as well as the fact that with large diameters they have a fairly decent weight and dimensions - this is especially important when sending cargo by a carrier.