Brass herringbone fittings for hose and tank tie-in (tank outlet)
When organizing a water supply or irrigation system, it is difficult to do without simple and familiar to all brass fittings of a herringbone hose, tie-ins to the tank (conclusions from the tank), which greatly simplify the solution of rather complex problems of connecting and laying pipelines.
We suggest familiarize yourself with the procedure for placing an online order on our website - by clicking on the specified link, you can get a detailed description of the actions and watch a short VIDEO with explanations.
A set of brass fittings manufactured by STA with an internal thread 3/4" (Dn20mm) and an external thread 1/2" (Dn15mm) is used for the installation of water meters (water meter, "water meter") in apartments and private houses.
Taps (bends) 15mm brass with rubber gaskets and clamping nuts are used for installation in the holes of the walls of the container for connection with the main when filling or draining liquids.
A 20mm brass tie-in with rubber gaskets and a clamping nut is used to install a flat surface of the container walls into the hole for connection to the main when filling or draining liquids.
A 25mm brass stub (branch) with rubber gaskets and a clamping nut is used to install a flat surface of the container walls into the hole for connection to the main when filling or draining liquids.
STA brass fitting with 15mm internal thread and 10mm herringbone is used to connect a hose with a clamp to a pipeline or device with an outlet external thread 15mm.
STA brass fitting with 15mm external thread and 10mm herringbone is used to connect a hose with a clamp to a pipeline or device with a 15mm female outlet thread.
Brass fitting manufactured by STA with an internal thread 15mm and a herringbone 12mm - used to connect a hose with a clamp to a pipeline or device with an outlet external thread 15mm.
Brass fitting manufactured by STA with an external thread 15mm and a herringbone 12mm - used to connect a hose with a clamp to a pipeline or device with an outlet internal thread 15mm.
Brass fitting manufactured by STA with an internal thread 15mm and a herringbone 14mm - used to connect a hose with a clamp to a pipeline or device with an outlet external thread 15mm.
STA brass fitting with 15mm external thread and 14mm herringbone is used to connect a hose with a clamp to a pipeline or device with a 15mm female outlet thread.
STA brass fitting with 15mm internal thread and 16mm herringbone is used to connect a hose with a crimp collar to a pipeline or device with a 15mm external thread.
STA brass fitting with 15mm external thread and 16mm herringbone is used to connect a hose with a clamp to a pipeline or device with a 15mm female outlet thread.
Brass fitting produced by STA with internal thread 15mm and herringbone 18mm is used to connect a hose with a crimp collar to a pipeline or device with an outlet external thread 15mm.
Brass fitting manufactured by STA with an external thread 15mm and a herringbone 18mm is used to connect a hose with a crimp collar to a pipeline or device with an outlet external thread 15mm.
STA brass fitting with 15mm internal thread and 20mm herringbone is used to connect a hose with a crimp collar to a pipeline or device with a 15mm external thread.
Brass fitting manufactured by STA with an external thread 15mm and herringbone 20mm is used to connect a hose with a crimp collar to a pipeline or device with an outlet external thread 15mm.
Brass fitting manufactured by STA with an internal thread of 20 mm and a "herringbone" for connecting a 15 mm hose with a clamp to a pipeline or device with an outlet external thread of 20 mm.
Brass fitting manufactured by STA with an external thread 20mm and herringbone 15mm is used to connect a hose with a clamp to a pipeline or device with an outlet internal thread 3/4"mm.
Brass fitting manufactured by STA with an external thread 20mm and a herringbone 20mm is used to connect a hose with a crimp collar to a pipeline or device with an outlet external thread DN20mm.
Brass fitting manufactured by STA with an external thread DN20mm and a herringbone 25mm is used to connect a hose with a crimp collar to a pipeline or device with an outlet external thread 25mm.
STA brass fitting with 25mm internal thread and 20mm herringbone is used to connect a hose with a crimp collar to a pipeline or device with an outlet external thread of 25mm.
STA brass fitting with 25mm internal thread and 25mm herringbone is used to connect a hose with a crimp collar to a pipeline or device with an outlet external thread 25mm.