Elbows steel bent galvanized with thread Du20mm GOST 3262-76
Availability: in stock
Short description
Elbow bent galvanized steel DN20mm (elbow) with a threaded part - a structural part of increased resistance to corrosion for the installation of a pipeline system, which serves to change the direction of movement of transported substances or to bypass an obstacle by changing the direction of the pipeline with subsequent threaded connection.
Elbow bent galvanized steel DN20mm with thread (elbow) - a structural element with increased resistance to corrosion of the pipeline system, which serves to change the direction of movement of transported substances or to bypass an obstacle by changing the direction of the pipeline with subsequent threaded connection. Bends galvanized bent steel DN20mm are used to connect pipes of the same diameter on one side by welding, and on the other - threaded, located at a certain angle relative to each other. In order for the pipeline to be able to withstand exposure to aggressive media, pressure from substances passing through the pipes, as well as external influences due to climatic conditions, the designs of bent bends must meet all standards and be of high quality.
Bent galvanized are actively used in the petrochemical and gas industries, when laying field technological pipelines, in the utility network and in systems transporting aggressive media.
Bent bends are made from blanks of galvanized pipes with a thread by the method of transverse bending in a cold state, they are used to perform turns of the linear part of pipelines if a greater degree of angle is required than that of sharply bent systems and a detachable threaded connection with increased resistance to corrosion is required. You can buy a galvanized threaded bent bend from pipes VGP Du 20mm , which will meet the following requirements of GOST 3262-76 :
- Purpose: for installation of pipelines
- Connection: welding, external thread
- Working medium: water, steam, gas
- Working environment temperature, °С: up to 175
- Nominal pressure (kgf/cm2): 16