Safety valve for heating safety group
Availability: in stock
The safety valve of the safety group for boilers and boilers of autonomous heating systems is suitable for both gas and solid fuel boilers at an operating temperature of not more than 110 ° C.
New from STA!
We bring to your attention a safety (relief) valve with a fixed setting for automatic pressure relief above 3 bar and a cap handle for manual pressure relief.
The manual reset device does not allow the valve to remain in the open position - the reset is carried out with small portions of the coolant when the handle is turned counterclockwise until it clicks. The relief valve of the safety group has an outlet for draining the discharged volume of coolant with an internal thread ½”, which can be connected through a threaded fitting to a hose or outlet pipe. The boiler safety group is installed on the heating supply line as close as possible to the heating boiler.
We would like to draw your attention to the fact that in modern imported gas boilers, as a rule, the above elements of the safety group are structurally provided, so it makes no sense to install them additionally.
Firm Ltd. "S.T.A." offers to buy a safety (relief) valve that meets the following technical requirements :
- Purpose: for closed heating system with forced circulation
- Nominal pressure, PN (Ru): up to 0.3 MPa
- Temperature: up to +110 0 С
- Body material: Brass LS-59
- Weight : 0.105 kg